FreezeCell- Round

Easy to use:
No need to add any liquid or pre-cooling, simply put your samples directly into the FreezerCell™ and keep all your samples in a -80℃ low-temperature environment.

With the easy-open lid and you can hold the FreezerCell™ directly from the -80℃ freezer without any concern of frostbite
to your fingers.

Transfer the samples conveniently, you can remove the whole box or an individual sample at any time

Low cost:
No maintenance costs, no need to replace anything. Once you purchase the FreezerCell™,it will serve you for years to come.

Reuse the FreezerCell™ over and over,5-minute turnaround time

The FreezerCell™ footprint is minimal, and won’t use up a lot of freezer space.

Higher cell survival rate:
Cooling rate consistency is very good, freeze an individual experimental or a full load. The cooling rate on each sample is the same every time

Usage
Simply put the samples to be frozen into FreezerCell™, and apply the lid. The FreezerCell™ must be placed in a -80℃ environment for at least 3 hours, during the cooling period, do not open during the cooling process. After the cooling processing is complete, the sample can be removed and transferred to a liquid nitrogen tank for long term storage. If you need to reuse the FreezerCell™ quickly, simply open the lid and
remove the tray, let them both return to room temperature, then you are ready to use again.

Specifications

Warranty

Crystal Technology proudly provides a full 2 Year Replacement Warranty on all of its products to be free of manufacturer defect.  Product misuse or damage, not caused by manufacture defect do not qualify for warranty replacement.